Brass Turbine Flow Meter For Water
Original price was: $388.00.$98.99Current price is: $98.99.
- Compact Design
- Wide Turn Down Ratio
- High Quality Sapphire Bearing
- Fixed Pulse Rate
- 100% Quality Satisfaction
- Uncompromising quality, every time.
- Quality You Can Trust
- Your questions, our prompt answers.
The FTB370 Series flow turbines are designed for flow rate measurement of water and many water based liquids. They are compact in design and have a wide measuring range. The liquid flowing into the FTB370 series is divided by guiding blades into four split streams. The uniform loading of the bearings from four sides causes the forces to cancel themselves out and wear gets reduced to a minimum. The extremely hard bearing materials also ensure an extraordinary life expectancy.
SPECIFICATIONS
Accuracy: ±3% of reading
Repeatability: ±0.5%
Output: NPN open collector (hall effect)
K-Factor [Pulses/Liter (Pulses/Gallon)]:
    FTB371: 869 (3289)
    FTB372: 68 (258)
    FTB373: 27 (102)
Maximum Temperature: 85°C (185°F) [at 0.689 bar (10 psi)] Maximum Pressure: 9.997 bar (145 psi) [at 29.4°C (85°F)] Power Supply: 5 to 24 Vdc (20 mA max)
Cable: 1.5 m (5′) [maximum temperature 70°C (158°F)] Protection: NEMA-3 (IP54)
Maximum Particle Size: 0.508 mm (0.02″)
Wetted Materials
Brass Body: CuZn36Pb2 As CW602N
Sensor Housing: Polypropylene Noryl
Magnets: Recona 28 nickel-plated
Rotor: PEI ULTEM
O-Ring: NBR
Bearings: Sapphire
Shaft:
    FTB371: Arcap AP1D
    FTB372: 316SS
    FTB373: 316SS
| Model No. | Length mm (in) | Diameter mm (in) | Height mm (in) | Fittings | Range LPM (GPM) | K-Factor PPL (PPG) | Pressure Drop Bar (psi) |
|---|---|---|---|---|---|---|---|
| FTB371 | 89 (3.5) | 38 (1.5) | 58 (2.3) | 3/4 NPT | 1.9 to 39.4 (0.5 to 10.4) | 869 (3289) | 2.2 (32) |
| FTB372 | 203 (8.0) | 51 (2.0) | 89 (3.5) | 1 NPT | 4.2 to 158 (1.1 to 41.6) | 68 (258) | 0.45 (6.5) |
| FTB373 | 292 (11.5) | 76 (3.0) | 89 (3.5) | 1½ NPT | 50 to 416 (13.2 to 110) | 27 (102) | 1.8 (26) |
| Flow Range | 1.1 to 41.6 GPM, 0.5 to 10.4 GPM, 13.2 to 110 GPM |
|---|---|
| Wetted Materials | Brass, Polypropylene, Nickel, Sapphire, Nylon, EPDM, 316 SS, Brass, Polypropylene, Nickel, Sapphire, Nylon, EPDM, ARCAP AP1D |
| Process Connection Size | 1", 3/4", 1-1/2" |
| Category | Meter |
| Media Type | Liquid |
| Accuracy | ±3% |
| Output Signal | Amplified Square Wave |
| Max Operating Pressure | 145 psi |
| Max Process Temperature | 85 °C (185 °F) |
| Process Connection Type | NPT Male |
| Display | No Display |
Be the first to review “Brass Turbine Flow Meter For Water”
Related products
Control & Monitoring
Control & Monitoring
Control & Monitoring
Control & Monitoring
Control & Monitoring
Control & Monitoring
Control & Monitoring
Microstepping Motor Drives, Analog In/Step & Direction Control
Control & Monitoring
Reviews
There are no reviews yet.