View Temperature + Humidity With A Web Browser
The OMEGA™ iTHX-SD transmitter lets you monitor and record Temperature, Relative Humidity and Dew Point over an Ethernet network or the Internet with no special software except a Web Browser.
The iTHX-SD serves Active Web Pages to display real-time readings, display charts of temperature and humidity, or log data in standard data formats for use in a spreadsheet or data acquisition program such as Excel or Visual Basic. The virtual chart viewed on the web page is a JAVA Applet that records a chart over the LAN or Internet in real-time. With the iTHX-SD, there is no need to invest time and money learning a proprietary software program to log or chart the data.
| SD Flash Memory Card The iTHX-SD comes complete with a removable SD Flash Memory card that can store up to years of readings taken at ten second intervals. Records on SD Flash Cards
|
|
| Alarm Relays The iTHX-SD features two 1.5 Amp relays. With the easy Web-based setup page, the two relays can be programmed for any combination of temperature or humidity, and high or low set points. The relays can also be programmed to remain latched and require a manual reset if a limit is exceeded. Battery Backup Adjustable Charts Award-Winning Technology Email Alarms Link to Web CAM or IP Camera Display and Chart Two Channels Sensor and Calibration Typical Applications
|
| SPECIFICATIONS SENSOR SPECIFICATIONS ![]()
|
| RELATIVE HUMIDITY (RH) Accuracy/Range at 25°C- Non-Condensing: ±2.75% for 10 to 90% ±3% for 5 to 10% and 90 to 95% ±4% for 0 to 5% and 95 to 100% Non-linearity: ±3% Hysteresis: ±1% RH Response Time: 8 seconds, tau 63% Repeatability: ±0.1% Resolution: 0.1%, 12 bit DEWPOINT -90 to 125°C (-130 to 257°F) PROBE DIMENSIONS |
TEMPERATURE(T) Accuracy/Range*: Wand Probe: ±0.5°C for 5 to 45°C (±1°F for 41° to 113°F); up to ±1°C for 0 to 5°C and 45 to 60°C (up to ±2°F for 32 to 41°F and 113 to 140°F) Industrial Probe: ±0.5°C for 5 to 45°C (±1°F for 41 to 113°F); up to ±1.5°C for -40 to 5°C and 45 to 124°C (up to ±2.7°F for -40 to 41°F and 113 to 255°F) (see chart) *Note: extended temperature range is for Industrial Probe only, the iServer’s operating temp. is 0 to 60 °C. Response Time: 5 to 30 seconds, tau 63% Repeatability: ±0.1°C Resolution: 0.1°C, 14 bit |
| Industrial Probe iTHP-2, iTHP-5: 16mm Diameter x 51mm Long (0.63″ x 2″) or 16mm Diameter x 137mm Long (0.63″ x 5″) Cable with DB9 connector: 0.9m Long (3′) or Cable with DB9 connector: 3m Long (10′) Cable operating temperature: -40 to 125°C (-40 to 257°F) |
Optional and Standard Caps for Probes One porous polyethylene cap IP-PCI or IP-PCW (depending on your probe type) is included with each probe. An optional stainless steel cap IP-SC is available for industrial probes. |
| iSERVER SPECIFICATIONS Interfaces Ethernet (RJ45): Fixed or autonegotiating 10/100BASE-T, Auto MDI/MDIX Sensor: Digital 4-wire (DB-9) Supported Protocols TCP, UDP, SNMP, SMTP, NTP, ARP, ICMP, DHCP, DNS, HTTP, and Telnet LCD Display 16 Digits 6mm (0.23″) SD Flash Memory Card 2GB card: 8 months of data storage at 1 second recording intervals or 7 years at 10 second intervals Relay Outputs Two Relays 1.5A @ 30 Vdc Management Device configuration and monitoring through embedded WEB server Embedded WEB Server Serves WEB pages containing real-time data and live updated charts within definable time intervals.
|
ENVIRONMENTAL Operating Temperature: iServer Unit: 0 to 60°C (32 to 140°F) ac Power Adapter: 0° to 40°C (32° to 104°F) Back-up Battery: -18 to 55°C (-0.4 to 131°F) Storage Temperature: -40 to 85°C (-40 to 185 °F) PACKAGING AGENCY APPROVALS: CE FCC-B |
| POWER Power Input: 9 to 12 Vdc Consumption: 3.5 W Safety Qualified ac Power Adapter (included) Nominal Output: 9 Vdc @ 0.5 A Input: 100 to 240 Vac, 50/60 Hz Back-up Battery: 9Vdc, Alkaline |
![]() Universal ac Power Adapter
|
| REPLACEMENT PROBES & CALIBRATION CERTIFICATES No need to take your unit out of service to get re-calibrated, order a calibrated probe instead. |
|
![]() Optional Probe Caps shown, |
![]() Get a NIST Traceable Calibration Certificate |









Reviews
There are no reviews yet.